On DuraGrace’s own website, kitchen sinks run from ₹1,186 for a compact stainless steel single bowl to ₹21,038 for a large handcrafted SS 304 layout. Two sinks of the same size can sit thousands of rupees apart on a quote, and the cheaper one is not always the worse buy.
Most buyers compare price tags without knowing what sits behind them: the steel grade, the sheet thickness, how the bowl is built and which fittings come in the box. The result is either paying for features you will never use, or buying a sink that dents, rings or stains sooner than you expected.
This guide breaks down the kitchen sink price in India by type, shows DuraGrace’s listed price range for every series (as of 16 November 2026), lists the hidden costs most quotes skip, and ends with a checklist for comparing two quotes fairly.
Quick answer: Kitchen sink price in India runs from about ₹1,200 for a compact stainless steel single bowl to roughly ₹21,000 for the largest handcrafted SS 304 layouts. DuraGrace lists Deluxe from ₹1,186, Premium from ₹1,526, 304C from ₹4,158, Carnation Quartz from ₹6,503 and Hand Crafted from ₹8,492 (as of 16 November 2026).
How Much Does a Kitchen Sink Cost in India in 2026?
A kitchen sink in India costs from roughly ₹1,200 to ₹21,000 on DuraGrace’s own price list, depending on series, size and bowl layout. Basic stainless steel sinks sit at the low end, ceramic-coated 304C and quartz sinks in the middle, and handcrafted SS 304 sinks at the top.
Series | Material (as listed) | Bowl layouts | Listed price range |
Stainless steel (“SS”) | Single, single with drainboard | ₹1,186 – ₹3,392 | |
Stainless steel (“SS”) | Single, single with drainboard, double | ₹1,526 – ₹6,796 | |
SUS 304 stainless steel with ceramic coating | Single, single with drainboard, double, 8-inch and 10-inch single | ₹4,158 – ₹15,725 | |
Quartz and resin composite | Single, single with drainboard, double | ₹6,503 – ₹19,508 | |
SS 304 | Single, single with drainboard, double | ₹8,492 – ₹21,038 |
Source: DuraGrace kitchen sinks category and product pages, as displayed on 16 November 2026. Prices change, so read the final price on the variant you choose.
Each series carries a 15% badge on the category page, and the offers page lists up to 20% off on selected kitchen sinks. Within a series, smaller single bowls usually sit near the lower end of the range and the largest double-bowl or drainboard layouts near the upper end. Check the exact variant before you decide, because that is where the real price appears. Next, it helps to know what actually moves the number.
What Decides the Price of a Kitchen Sink?
Five things decide a kitchen sink’s price: steel grade or quartz content, sheet thickness, how the bowl is made, the surface finish or coating, and the bowl layout and size. Grade and build often explain the gap between two quotes of the same size.
Steel grade
SS 304 is a stainless steel alloy with roughly 18% chromium and 8% nickel, which is why it resists rust and pitting better than cheaper SS 202. The two look the same in a showroom. Our 304 stainless steel vs quartz guide explains how to tell them apart and includes the gauge table.
Sheet thickness (gauge)
Thicker steel costs more, dents less and rings less when a steel katori drops in. Gauge numbers run backwards, so a lower number means thicker steel. The easiest place to measure is the cut edge of the drain hole, a check we cover in the handmade vs drawn sink guide.
How the bowl is made
A drawn sink is pressed from one sheet in a die. A handmade sink is cut, folded and welded from separate sheets. Handmade costs more because it takes more labour and keeps the thickness even across the bowl, including the corners.
Finish and coating
A ceramic coating, such as the one on the 304C, adds a smooth surface that helps reduce water marks and fingerprints. It is a finish on top of the steel, not a replacement for good steel, so judge the grade first and the coating second.
Bowl layout and size
A single bowl uses the least material. A single bowl with a drainboard or a double bowl uses more steel or quartz and takes more fabrication, so it costs more. Larger sizes such as 41×20 or 45×20 inches also need a wider cabinet.
Warranty and brand
A longer warranty costs the maker money to honour, and that shows in the price. DuraGrace lists a 10-year warranty and a 30-day replacement policy on its site. Ask what the warranty covers for the exact sink you pick, because the bowl, the coating and the fittings can carry different terms.
304 Stainless Steel Kitchen Sink Price: What You Pay For
A 304 stainless steel kitchen sink costs more than a basic steel sink because 304 resists rust and pitting better in humid, hard-water kitchens. DuraGrace’s 304C is listed at ₹4,158 to ₹15,725, and the Hand Crafted SS 304 range at ₹8,492 to ₹21,038.
The 304C series pairs SUS 304 stainless steel with a ceramic coating. It comes in 13 sizes from 16×14 to 45×20 inches, plus 8-inch and 10-inch deep single bowls. It suits families who want 304 grade and an easy-to-wipe surface without moving to a fully handcrafted sink.
The Hand Crafted series is the top of the steel range, with deep bowls, sharp-cornered fabrication and sound-deadening listed on the product page. Whichever 304 sink you pick, ask for the grade and thickness in writing. A sink that says only “stainless steel” on the invoice tells you nothing about what you are paying for.
Quartz Kitchen Sink Price: Why It Costs More Than Basic Steel
A quartz kitchen sink usually costs more than a basic steel sink because it is a moulded composite of crushed quartz and resin, available in colours steel cannot offer. DuraGrace’s Carnation Quartz range is listed at ₹6,503 to ₹19,508, in five colours and single, drainboard and double layouts.
The Carnation Quartz Sink comes in Montana Grey, Comflakes Beige, Nero Black, Expresso Brown and Chroma Gris, in six sizes from 18×16 to 45×20 inches. Quartz is also noticeably heavier than steel, so ask your fabricator to confirm that the cabinet and counter can carry it before you order. That check can add carpentry cost to the project.
As with steel grade, ask for the quartz-to-resin ratio in writing. Higher quartz content generally means a harder surface. Our steel vs quartz comparison covers noise, heat, hard water and cleaning in detail.
Premium Kitchen Sink India: Where DuraGrace Premium and Deluxe Fit
Deluxe and Premium are DuraGrace’s entry-level stainless steel series, listed at ₹1,186 to ₹3,392 and ₹1,526 to ₹6,796. They suit rentals, secondary kitchens and light to moderate use. Both list the material simply as stainless steel, so confirm the grade and thickness on your quote.
The Deluxe Series offers seven sizes from 15×12 to 37×18 inches in single and single-with-drainboard layouts. The Premium Sink adds double bowls and larger sizes up to 45×20 inches. Both product pages list noise reduction as a feature.
If you cook daily with heavy vessels and want the longest service life, step up to 304C or Hand Crafted. If the sink is for a rental, a utility area or a first flat, the lower tiers are a sensible way to keep the budget for the rest of the kitchen.
Handcrafted Kitchen Sink India: Is the Higher Price Worth It?
A handcrafted sink costs more because the sheets are cut, folded and welded by hand, which gives even thickness, deeper bowls and tighter corners. It is worth the premium for daily cooking and large vessels. For occasional use, a good drawn sink saves money without much compromise.
The Hand Crafted range starts at ₹8,492 and is made from SS 304 in seven sizes between 18×16 and 45×20 inches. The extra cost buys a sturdier bowl that handles large kadais, trays and stacked utensils. The trade-off is that sharp corners need a soft brush to keep clean.
Not sure what to inspect? Our handmade vs drawn guide gives a seven-point checklist for welds, thickness, dampening and the ISI mark. Use it before you pay for any handcrafted sink, from any brand.
What Else Should You Budget For? Hidden Costs Beyond the Sink Price
The sink price is rarely the final bill. Add the waste coupling, waste pipe, connection pipes, sealant, counter cut-out work, fitting labour and, for quartz, possible cabinet reinforcement. Ask your dealer for one written quote that lists every part so nothing surprises you on installation day.
- Waste coupling and waste pipe:needed to connect the bowl to the drain. See DuraGrace waste couplings and plumbing essentials.
- Connection pipes:DuraGrace’s connection pipe is listed at ₹208 to ₹366, depending on the variant.
- Angle valves:a shut-off valve under the sink makes repairs easier. Our angle valve guide explains types, sizes and fitting.
- Tap or mixer:confirm whether your sink and counter have a tap hole, and match the tap to the bowl depth.
- Counter cut-out:granite or quartz counters need an accurate cut-out. Ask the supplier for a template, and confirm top-mount or undermount.
- Sealant and labour:fabricator and plumber charges vary by city, so get them in writing.
- Cabinet support (quartz):heavier sinks may need reinforced support before installation.
Adding these up early lets you compare sinks on total cost rather than sticker price. That matters most when two quotes differ by only a few hundred rupees but include different parts.
Which Kitchen Sink Fits Your Budget? A Quick Decision Table
There is no single best kitchen sink for every budget. Match the sink to how you cook. Light use and rentals suit entry-level steel, daily family cooking suits 304C, colour-matched dark kitchens suit quartz, and heavy cooking with large vessels suits handcrafted SS 304.
Your situation | Budget direction | DuraGrace series to look at | Check before buying |
Rental, first flat or utility kitchen | Entry | Deluxe, Premium (₹1,186 – ₹6,796) | Grade and thickness in writing |
Everyday family kitchen, easy-wipe surface | Mid | 304C (₹4,158 – ₹15,725) | Coating and warranty terms |
Dark modular kitchen, colour match, quieter use | Mid to upper | Carnation Quartz (₹6,503 – ₹19,508) | Quartz content, cabinet support |
Heavy daily cooking, large vessels | Upper | Hand Crafted SS 304 (₹8,492 – ₹21,038) | Inside bowl size, weld finish |
Prices above are DuraGrace’s listed ranges as of 16 November 2026. If you are torn between two series, the kitchen sinks category lets you compare sizes and layouts side by side.
How to Compare Two Kitchen Sink Quotes Fairly
To compare two kitchen sink quotes fairly, match the inside bowl size, then compare grade, thickness in millimetres, build method, noise dampening and warranty scope. Check whether each quote includes fittings, GST and delivery. Two sinks with the same size and different prices are rarely the same product.
- Same size, same layout.Ask whether the listed size is the outer size including the rim or the inside bowl.
- Grade in writing.SS 304, SS 202 or quartz composite should be on the invoice or spec sheet.
- Thickness in millimetres.Compare mm, not adjectives like “heavy duty”.
- Build method.Handmade (welded) or drawn (pressed).
- Noise dampening.Ask what the undercoat and pads are, and where they are applied.
- Warranty scope.Ask what is covered on the bowl and what is covered on fittings, and get it in writing.
- ISI mark.Stainless steel sinks for domestic use fall under IS 13983. Look for the ISI mark and confirm the position on the Bureau of Indian Standards website.
- What is included.Confirm the waste coupling, basket and fittings, and whether GST and delivery are in the price.
Kitchen Sink Online India: How to Buy Safely
To buy a kitchen sink online in India safely, buy from the manufacturer or an authorised dealer, confirm the exact size and layout before paying, keep the grade and warranty details, and check the return window. DuraGrace lists a 30-day replacement policy, so read its terms on the site before ordering.
When you search for a kitchen sink online India listings can look identical while the specifications differ. Product pages that state grade, size and layout clearly are easier to trust. If you prefer to see a sink in person, the store locator lists DuraGrace dealers across 20 states, including Ahmedabad, Surat, Vadodara and Rajkot in Gujarat.
Still unsure about size or series? Contact DuraGrace with your cabinet width and cooking habits, and get a recommendation before you order.
Conclusion: Choose by Build First, Then by Price
The right kitchen sink price is the one that matches how you cook, how big your cabinet is and what the sink is actually made of. Compare grade, thickness and warranty before comparing rupees, and budget for the fittings that come with the sink. When you are ready, browse the full DuraGrace kitchen sink range, check the current offers, or talk to the team for sizing advice.
Frequently Asked Questions
How much does a kitchen sink cost in India?
Kitchen sink price in India ranges from about ₹1,200 to ₹21,000 on DuraGrace’s own list, depending on series, size and layout. Deluxe starts at ₹1,186, Premium at ₹1,526, 304C at ₹4,158, Carnation Quartz at ₹6,503 and Hand Crafted SS 304 at ₹8,492, as of 16 November 2026.
Which kitchen sink is best for Indian kitchens?
It depends on how you cook. A 304 stainless steel sink in 18-gauge or thicker suits daily cooking and hot vessels, while quartz suits dark, quiet kitchens and hard-water cities. Match the choice to your habits and cabinet, and verify grade or quartz content before paying.
Is a quartz sink more expensive than a steel sink?
Usually, compared with a basic steel sink of similar size. DuraGrace’s Carnation Quartz starts at ₹6,503, while Deluxe starts at ₹1,186. The gap narrows at the top, because a handcrafted SS 304 sink can cost as much as a quartz sink.
Why do two sinks of the same size have different prices?
Because size is only one factor. Steel grade, sheet thickness, handmade or pressed construction, noise dampening, coating and warranty all change the cost. Ask for grade and thickness in writing and compare those, not just the length and width, before choosing the cheaper quote.
Is a 304 stainless steel sink worth the extra cost?
For daily cooking, yes. SS 304 has more nickel and chromium than SS 202, so it resists rust and pitting better in humid, hard-water kitchens. For a rental or a rarely used kitchen, a lower tier can be enough, provided the grade is stated.
What hidden costs should I plan for after buying a sink?
Plan for the waste coupling, waste pipe, connection pipes, an angle valve, sealant, counter cut-out work and fitting labour. Quartz may also need reinforced cabinet support. Ask for one written quote listing every part, so you compare total cost instead of the sink price alone.
Is a handcrafted kitchen sink worth it?
It is worth it when you cook daily and wash large kadais, trays and stacked utensils. Handcrafted sinks use thicker, evenly welded steel with deeper bowls and tighter corners. For light use, a well-made drawn sink in SS 304 saves money and wipes clean faster.
Can I buy a kitchen sink online in India safely?
Yes, if you buy from the manufacturer or an authorised dealer and confirm the exact size, layout, grade and warranty before paying. Keep the invoice, check the return window, and ask for the cabinet cut-out size so the sink fits without rework.
Does DuraGrace offer a warranty on kitchen sinks?
DuraGrace’s website lists a 10-year warranty and a 30-day replacement policy across its products. Warranty terms can differ between the bowl, coating and fittings, so ask for the exact terms for the sink you choose and keep them with your invoice.
Does a double bowl sink cost more than a single bowl?
Generally yes, because it uses more material and takes more fabrication, and it needs a wider cabinet. Deluxe has single layouts only, while Premium, 304C, Hand Crafted and Quartz offer double bowls. Confirm the exact variant price on the product page.
